Running 'testthat.R' [6s]
Running the tests in 'tests/testthat.R' failed.
Complete output:
  > library(testthat)
  > library(skimr)
  Registered S3 method overwritten by 'skimr':
    method      from  
    print.spark pillar
  
  Attaching package: 'skimr'
  
  The following object is masked from 'package:testthat':
  
      matches
  
  The following object is masked from 'package:stats':
  
      filter
  
  > 
  > test_check("skimr")
  -- 1. Failure: Skimr kable prints as expected, 64-bit (@test-skim_print.R#76)  -
  input[15] not equal to "| Petal.Length |    0    |   150    | 150 | 3.76 | 1.77 |  1  | 1.6 | 4.35 | 5.1 | 6.9  | ???????? |".
  1/1 mismatches
  x[1]: "| Petal.Length |    0    |   150    | 150 | 3.76 | 1.77 |  1  | 1.6 | 4.3
  x[1]: 5 | 5.1 | 6.9  | ???????? |"
  y[1]: "| Petal.Length |    0    |   150    | 150 | 3.76 | 1.77 |  1  | 1.6 | 4.3
  y[1]: 5 | 5.1 | 6.9  | ???????? |"
  
  -- 2. Failure: Skimr kable prints as expected, 64-bit (@test-skim_print.R#79)  -
  input[16] not equal to "| Petal.Width  |    0    |   150    | 150 | 1.2  | 0.76 | 0.1 | 0.3 | 1.3  | 1.8 | 2.5  | ???????? |".
  1/1 mismatches
  x[1]: "| Petal.Width  |    0    |   150    | 150 | 1.2  | 0.76 | 0.1 | 0.3 | 1.3
  x[1]:   | 1.8 | 2.5  | ???????? |"
  y[1]: "| Petal.Width  |    0    |   150    | 150 | 1.2  | 0.76 | 0.1 | 0.3 | 1.3
  y[1]:   | 1.8 | 2.5  | ???????? |"
  
  -- 3. Failure: Skimr kable prints as expected, 64-bit (@test-skim_print.R#82)  -
  input[17] not equal to "| Sepal.Length |    0    |   150    | 150 | 5.84 | 0.83 | 4.3 | 5.1 | 5.8  | 6.4 | 7.9  | ???????? |".
  1/1 mismatches
  x[1]: "| Sepal.Length |    0    |   150    | 150 | 5.84 | 0.83 | 4.3 | 5.1 | 5.8
  x[1]:   | 6.4 | 7.9  | ???????? |"
  y[1]: "| Sepal.Length |    0    |   150    | 150 | 5.84 | 0.83 | 4.3 | 5.1 | 5.8
  y[1]:   | 6.4 | 7.9  | ???????? |"
  
  -- 4. Failure: Skimr kable prints as expected, 64-bit (@test-skim_print.R#85)  -
  input[18] not equal to "| Sepal.Width  |    0    |   150    | 150 | 3.06 | 0.44 |  2  | 2.8 |  3   | 3.3 | 4.4  | ???????? |".
  1/1 mismatches
  x[1]: "| Sepal.Width  |    0    |   150    | 150 | 3.06 | 0.44 |  2  | 2.8 |  3 
  x[1]:   | 3.3 | 4.4  | ???????? |"
  y[1]: "| Sepal.Width  |    0    |   150    | 150 | 3.06 | 0.44 |  2  | 2.8 |  3 
  y[1]:   | 3.3 | 4.4  | ???????? |"
  
  == testthat results  ===========================================================
  OK: 396 SKIPPED: 7 WARNINGS: 1 FAILED: 4
  1. Failure: Skimr kable prints as expected, 64-bit (@test-skim_print.R#76) 
  2. Failure: Skimr kable prints as expected, 64-bit (@test-skim_print.R#79) 
  3. Failure: Skimr kable prints as expected, 64-bit (@test-skim_print.R#82) 
  4. Failure: Skimr kable prints as expected, 64-bit (@test-skim_print.R#85) 
  
  Error: testthat unit tests failed
  Execution halted