* installing *source* package ‘astrochron’ ...
** package ‘astrochron’ successfully unpacked and MD5 sums checked
** using staged installation
** libs
/opt/R/arm64/bin/gfortran -mtune=native -fno-optimize-sibling-calls  -fPIC  -Wall -g -O2  -c EHA_Rv6e.f -o EHA_Rv6e.o
EHA_Rv6e.f:66:42:

   66 |       dimension dg(mxdata),spw(mxdpss),dcf(mxdpss,mxdata)
      |                                          1
Warning: Array ‘dcf’ at (1) is larger than limit set by ‘-fmax-stack-var-size=’, moved from stack to static storage. This makes the procedure unsafe when called recursively, or concurrently from multiple threads. Consider increasing the ‘-fmax-stack-var-size=’ limit (or use ‘-frecursive’, which implies unlimited ‘-fmax-stack-var-size’) - or change the code to use an ALLOCATABLE array. If the variable is never accessed concurrently, this warning can be ignored, and the variable could also be declared with the SAVE attribute. [-Wsurprising]
EHA_Rv6e.f:66:18:

   66 |       dimension dg(mxdata),spw(mxdpss),dcf(mxdpss,mxdata)
      |                  1
Warning: Array ‘dg’ at (1) is larger than limit set by ‘-fmax-stack-var-size=’, moved from stack to static storage. This makes the procedure unsafe when called recursively, or concurrently from multiple threads. Consider increasing the ‘-fmax-stack-var-size=’ limit (or use ‘-frecursive’, which implies unlimited ‘-fmax-stack-var-size’) - or change the code to use an ALLOCATABLE array. If the variable is never accessed concurrently, this warning can be ignored, and the variable could also be declared with the SAVE attribute. [-Wsurprising]
EHA_Rv6e.f:60:44:

   60 |       dimension u10(mxdpss),u20(mxdpss),dpss(mxdata,mxdpss),
      |                                            1
Warning: Array ‘dpss’ at (1) is larger than limit set by ‘-fmax-stack-var-size=’, moved from stack to static storage. This makes the procedure unsafe when called recursively, or concurrently from multiple threads. Consider increasing the ‘-fmax-stack-var-size=’ limit (or use ‘-frecursive’, which implies unlimited ‘-fmax-stack-var-size’) - or change the code to use an ALLOCATABLE array. If the variable is never accessed concurrently, this warning can be ignored, and the variable could also be declared with the SAVE attribute. [-Wsurprising]
EHA_Rv6e.f:68:17:

   68 |       dimension x(mxdata),y(mxdata),x1(mxdpss,mxdata),y1(mxdpss,mxdata)
      |                 1
Warning: Array ‘x’ at (1) is larger than limit set by ‘-fmax-stack-var-size=’, moved from stack to static storage. This makes the procedure unsafe when called recursively, or concurrently from multiple threads. Consider increasing the ‘-fmax-stack-var-size=’ limit (or use ‘-frecursive’, which implies unlimited ‘-fmax-stack-var-size’) - or change the code to use an ALLOCATABLE array. If the variable is never accessed concurrently, this warning can be ignored, and the variable could also be declared with the SAVE attribute. [-Wsurprising]
EHA_Rv6e.f:68:38:

   68 |       dimension x(mxdata),y(mxdata),x1(mxdpss,mxdata),y1(mxdpss,mxdata)
      |                                      1
Warning: Array ‘x1’ at (1) is larger than limit set by ‘-fmax-stack-var-size=’, moved from stack to static storage. This makes the procedure unsafe when called recursively, or concurrently from multiple threads. Consider increasing the ‘-fmax-stack-var-size=’ limit (or use ‘-frecursive’, which implies unlimited ‘-fmax-stack-var-size’) - or change the code to use an ALLOCATABLE array. If the variable is never accessed concurrently, this warning can be ignored, and the variable could also be declared with the SAVE attribute. [-Wsurprising]
EHA_Rv6e.f:58:18:

   58 |       dimension xx(mxdata),yy(mxdata)
      |                  1
Warning: Array ‘xx’ at (1) is larger than limit set by ‘-fmax-stack-var-size=’, moved from stack to static storage. This makes the procedure unsafe when called recursively, or concurrently from multiple threads. Consider increasing the ‘-fmax-stack-var-size=’ limit (or use ‘-frecursive’, which implies unlimited ‘-fmax-stack-var-size’) - or change the code to use an ALLOCATABLE array. If the variable is never accessed concurrently, this warning can be ignored, and the variable could also be declared with the SAVE attribute. [-Wsurprising]
EHA_Rv6e.f:68:27:

   68 |       dimension x(mxdata),y(mxdata),x1(mxdpss,mxdata),y1(mxdpss,mxdata)
      |                           1
Warning: Array ‘y’ at (1) is larger than limit set by ‘-fmax-stack-var-size=’, moved from stack to static storage. This makes the procedure unsafe when called recursively, or concurrently from multiple threads. Consider increasing the ‘-fmax-stack-var-size=’ limit (or use ‘-frecursive’, which implies unlimited ‘-fmax-stack-var-size’) - or change the code to use an ALLOCATABLE array. If the variable is never accessed concurrently, this warning can be ignored, and the variable could also be declared with the SAVE attribute. [-Wsurprising]
EHA_Rv6e.f:68:56:

   68 |       dimension x(mxdata),y(mxdata),x1(mxdpss,mxdata),y1(mxdpss,mxdata)
      |                                                        1
Warning: Array ‘y1’ at (1) is larger than limit set by ‘-fmax-stack-var-size=’, moved from stack to static storage. This makes the procedure unsafe when called recursively, or concurrently from multiple threads. Consider increasing the ‘-fmax-stack-var-size=’ limit (or use ‘-frecursive’, which implies unlimited ‘-fmax-stack-var-size’) - or change the code to use an ALLOCATABLE array. If the variable is never accessed concurrently, this warning can be ignored, and the variable could also be declared with the SAVE attribute. [-Wsurprising]
EHA_Rv6e.f:58:29:

   58 |       dimension xx(mxdata),yy(mxdata)
      |                             1
Warning: Array ‘yy’ at (1) is larger than limit set by ‘-fmax-stack-var-size=’, moved from stack to static storage. This makes the procedure unsafe when called recursively, or concurrently from multiple threads. Consider increasing the ‘-fmax-stack-var-size=’ limit (or use ‘-frecursive’, which implies unlimited ‘-fmax-stack-var-size’) - or change the code to use an ALLOCATABLE array. If the variable is never accessed concurrently, this warning can be ignored, and the variable could also be declared with the SAVE attribute. [-Wsurprising]
clang -arch arm64 -I"/Library/Frameworks/R.framework/Resources/include" -DNDEBUG   -I/opt/R/arm64/include   -fPIC  -falign-functions=64 -Wall -g -O2  -c Impulse_Response_v2.c -o Impulse_Response_v2.o
clang -arch arm64 -I"/Library/Frameworks/R.framework/Resources/include" -DNDEBUG   -I/opt/R/arm64/include   -fPIC  -falign-functions=64 -Wall -g -O2  -c Root_Search_v2.c -o Root_Search_v2.o
/opt/R/arm64/bin/gfortran -mtune=native -fno-optimize-sibling-calls  -fPIC  -Wall -g -O2  -c asm1.8cR.f -o asm1.8cR.o
asm1.8cR.f:244:17:

  244 |            ife = DINT(fe)
      |                 1
Warning: Possible change of value in conversion from REAL(8) to INTEGER(4) at (1) [-Wconversion]
asm1.8cR.f:31:34:

   31 |       dimension rAsm(mxsr),saveAsm(mxsr,mxdata)
      |                                  1
Warning: Array ‘saveasm’ at (1) is larger than limit set by ‘-fmax-stack-var-size=’, moved from stack to static storage. This makes the procedure unsafe when called recursively, or concurrently from multiple threads. Consider increasing the ‘-fmax-stack-var-size=’ limit (or use ‘-frecursive’, which implies unlimited ‘-fmax-stack-var-size’) - or change the code to use an ALLOCATABLE array. If the variable is never accessed concurrently, this warning can be ignored, and the variable could also be declared with the SAVE attribute. [-Wsurprising]
asm1.8cR.f:33:21:

   33 |       dimension store(mxdata),sedrate(mxsr),temp(mxsr)
      |                     1
Warning: Array ‘store’ at (1) is larger than limit set by ‘-fmax-stack-var-size=’, moved from stack to static storage. This makes the procedure unsafe when called recursively, or concurrently from multiple threads. Consider increasing the ‘-fmax-stack-var-size=’ limit (or use ‘-frecursive’, which implies unlimited ‘-fmax-stack-var-size’) - or change the code to use an ALLOCATABLE array. If the variable is never accessed concurrently, this warning can be ignored, and the variable could also be declared with the SAVE attribute. [-Wsurprising]
asm1.8cR.f:428:72:

  428 |            freqTmin = freqT(locfit) - (0.5d0*resol2)
      |                                                                        ^
Warning: ‘resol2’ may be used uninitialized [-Wmaybe-uninitialized]
asm1.8cR.f:385:29:

  385 |          if(ires.eq.1) resol2 = resol
      |                             ^
note: ‘resol2’ was declared here
asm1.8cR.f:416:21:

  416 |                locfit=k
      |                     ^
Warning: ‘locfit’ may be used uninitialized [-Wmaybe-uninitialized]
asm1.8cR.f:87:36:

   87 |       if(sedrate(1).lt.berSedmin.or.sedrate(numsed).gt.
      |                                    ^
Warning: ‘sedrate’ may be used uninitialized [-Wmaybe-uninitialized]
asm1.8cR.f:33:37:

   33 |       dimension store(mxdata),sedrate(mxsr),temp(mxsr)
      |                                     ^
note: ‘sedrate’ declared here
asm1.8cR.f:105:72:

  105 |          sedmin=sedminNew
      |                                                                        ^
Warning: ‘sedminnew’ may be used uninitialized [-Wmaybe-uninitialized]
asm1.8cR.f:94:25:

   94 |                 sedminNew=sedrate(i)
      |                         ^
note: ‘sedminnew’ was declared here
asm1.8cR.f:106:72:

  106 |          sedmax=sedmaxNew
      |                                                                        ^
Warning: ‘sedmaxnew’ may be used uninitialized [-Wmaybe-uninitialized]
asm1.8cR.f:98:25:

   98 |                 sedmaxNew=sedrate(i)
      |                         ^
note: ‘sedmaxnew’ was declared here
/opt/R/arm64/bin/gfortran -mtune=native -fno-optimize-sibling-calls  -fPIC  -Wall -g -O2  -c demean_v3.f -o demean_v3.o
/opt/R/arm64/bin/gfortran -mtune=native -fno-optimize-sibling-calls  -fPIC  -Wall -g -O2  -c detrend_v3.f -o detrend_v3.o
/opt/R/arm64/bin/gfortran -mtune=native -fno-optimize-sibling-calls  -fPIC  -Wall -g -O2  -c dlasrtastro_v2.f -o dlasrtastro_v2.o
/opt/R/arm64/bin/gfortran -mtune=native -fno-optimize-sibling-calls  -fPIC  -Wall -g -O2  -c dupmean_v3_R.f -o dupmean_v3_R.o
clang -arch arm64 -I"/Library/Frameworks/R.framework/Resources/include" -DNDEBUG   -I/opt/R/arm64/include   -fPIC  -falign-functions=64 -Wall -g -O2  -c getunif.c -o getunif.o
clang -arch arm64 -I"/Library/Frameworks/R.framework/Resources/include" -DNDEBUG   -I/opt/R/arm64/include   -fPIC  -falign-functions=64 -Wall -g -O2  -c init.c -o init.o
/opt/R/arm64/bin/gfortran -mtune=native -fno-optimize-sibling-calls  -fPIC  -Wall -g -O2  -c mwinGrid_R.f -o mwinGrid_R.o
mwinGrid_R.f:52:72:

   52 |          n2(k)=iout
      |                                                                        ^
Warning: ‘iout’ may be used uninitialized [-Wmaybe-uninitialized]
mwinGrid_R.f:49:35:

   49 |             if(x(i).le.winend) iout=i
      |                                   ^
note: ‘iout’ was declared here
mwinGrid_R.f:51:72:

   51 |          n1(k)=iin
      |                                                                        ^
Warning: ‘iin’ may be used uninitialized [-Wmaybe-uninitialized]
mwinGrid_R.f:45:36:

   45 |             if(x(i).ge.winstart) iin=i
      |                                    ^
note: ‘iin’ was declared here
/opt/R/arm64/bin/gfortran -mtune=native -fno-optimize-sibling-calls  -fPIC  -Wall -g -O2  -c mwin_R_v4.f -o mwin_R_v4.o
mwin_R_v4.f:72:72:

   72 |          midx2(i)= xhold - ( (xhold-x(i))/2.d0 )
      |                                                                        ^
Warning: ‘xhold’ may be used uninitialized [-Wmaybe-uninitialized]
mwin_R_v4.f:61:16:

   61 |            xhold=x(j)
      |                ^
note: ‘xhold’ was declared here
mwin_R_v4.f:64:72:

   64 |          kpts=iout-i+1
      |                                                                        ^
Warning: ‘iout’ may be used uninitialized [-Wmaybe-uninitialized]
mwin_R_v4.f:54:39:

   54 |            if(x(j)-winend.le.epsm) iout=j
      |                                       ^
note: ‘iout’ was declared here
/opt/R/arm64/bin/gfortran -mtune=native -fno-optimize-sibling-calls  -fPIC  -Wall -g -O2  -c mwincenter_R_v4.f -o mwincenter_R_v4.o
mwincenter_R_v4.f:66:72:

   66 |          n1(k) = iin
      |                                                                        ^
Warning: ‘iin’ may be used uninitialized [-Wmaybe-uninitialized]
mwincenter_R_v4.f:64:45:

   64 |            if(x(j)-winstart. ge. -1*epsm) iin=j
      |                                             ^
note: ‘iin’ was declared here
mwincenter_R_v4.f:45:60:

   45 |          if( (x(i)-winsize/2.d0) - x(1) .ge. -1*epsm) istart=i
      |                                                            ^
Warning: ‘istart’ may be used uninitialized [-Wmaybe-uninitialized]
mwincenter_R_v4.f:50:56:

   50 |         if(x(i) - (x(ipts)-winsize/2.d0) .le. epsm) iend=i
      |                                                        ^
Warning: ‘iend’ may be used uninitialized [-Wmaybe-uninitialized]
/opt/R/arm64/bin/gfortran -mtune=native -fno-optimize-sibling-calls  -fPIC  -Wall -g -O2  -c pad_v2.f -o pad_v2.o
/opt/R/arm64/bin/gfortran -mtune=native -fno-optimize-sibling-calls  -fPIC  -Wall -g -O2  -c peak_v2_R.f -o peak_v2_R.o
/opt/R/arm64/bin/gfortran -mtune=native -fno-optimize-sibling-calls  -fPIC  -Wall -g -O2  -c peakfilter_R.f -o peakfilter_R.o
peakfilter_R.f:5:23:

    5 |      &  freqloc,probmax,freq,background,pwr,cl,loc,nout)
      |                       1
Warning: Unused dummy argument ‘probmax’ at (1) [-Wunused-dummy-argument]
/opt/R/arm64/bin/gfortran -mtune=native -fno-optimize-sibling-calls  -fPIC  -Wall -g -O2  -c singleton_v3.f -o singleton_v3.o
singleton_v3.f:231:8:

  231 |       K3=K2+KSPAN
      |        ^
Warning: ‘k3’ may be used uninitialized [-Wmaybe-uninitialized]
/opt/R/arm64/bin/gfortran -mtune=native -fno-optimize-sibling-calls  -fPIC  -Wall -g -O2  -c trough_v2_R.f -o trough_v2_R.o
/opt/R/arm64/bin/gfortran -mtune=native -fno-optimize-sibling-calls  -fPIC  -Wall -g -O2  -c tune_v2_R.f -o tune_v2_R.o
clang -arch arm64 -dynamiclib -Wl,-headerpad_max_install_names -undefined dynamic_lookup -single_module -multiply_defined suppress -L/Library/Frameworks/R.framework/Resources/lib -L/opt/R/arm64/lib -o astrochron.so EHA_Rv6e.o Impulse_Response_v2.o Root_Search_v2.o asm1.8cR.o demean_v3.o detrend_v3.o dlasrtastro_v2.o dupmean_v3_R.o getunif.o init.o mwinGrid_R.o mwin_R_v4.o mwincenter_R_v4.o pad_v2.o peak_v2_R.o peakfilter_R.o singleton_v3.o trough_v2_R.o tune_v2_R.o -L/opt/R/arm64/gfortran/lib/gcc/aarch64-apple-darwin20.6.0/12.0.1 -L/opt/R/arm64/gfortran/lib -lgfortran -lemutls_w -lquadmath -F/Library/Frameworks/R.framework/.. -framework R -Wl,-framework -Wl,CoreFoundation
ld: warning: could not create compact unwind for _specmisfit_: register 73 saved somewhere other than in frame
ld: warning: could not create compact unwind for _asm18_r_: registers 74 and 75 not saved contiguously in frame
ld: warning: could not create compact unwind for _tune_r_: register 26 saved somewhere other than in frame
ld: warning: could not create compact unwind for ___emutls_get_address: registers 23 and 24 not saved contiguously in frame
ld: warning: dylib (/opt/R/arm64/gfortran/lib/libquadmath.dylib) was built for newer macOS version (11.5) than being linked (11.0)
ld: warning: could not create compact unwind for _eha_rv6_: registers 76 and 77 not saved contiguously in frame
ld: warning: could not create compact unwind for _singleton_: registers 78 and 79 not saved contiguously in frame
ld: warning: dylib (/opt/R/arm64/gfortran/lib/libgfortran.dylib) was built for newer macOS version (11.5) than being linked (11.0)
installing to /Volumes/Builds/packages/big-sur-arm64/results/4.2/astrochron.Rcheck/00LOCK-astrochron/00new/astrochron/libs
** generating debug symbols (dSYM)
** R
** data
** inst
** byte-compile and prepare package for lazy loading
** help
*** installing help indices
** building package indices
** testing if installed package can be loaded from temporary location
** checking absolute paths in shared objects and dynamic libraries
** testing if installed package can be loaded from final location
** testing if installed package keeps a record of temporary installation path
* DONE (astrochron)